Digitale elektronische Geräte  

 
   

3ctest - Automotive Load Dump Simulator

 
   
  LDS 200 l LDS 200D series   
         
   

LDS 200 - Load dump simulator

 
           
   

Load dump simulator LDS 200 simulates a sudden battery disconnection from the alternator, which cause the lost of the battery load the alternator generates an over voltage impulse.

LDS 200
LDS 200

PDF Datasheet

 

Load dump simulator LDS 200 simulates a sudden battery disconnection from the alternator,which cause the lost of the battery load the alternator generates an over voltage impulse. Such load dump pulses are high energy pulses with a high potential of destruction. The LDS200 generates the load dump pulses as per ISO 7637, ISO 16750-2, SAEJ 1113, SAEJ 1455, JASO and many more manufacturer specification, e.g. Ford, Chrysler, Renault, PSA, and NISSAN etc.

By means of a built-in clipping circuit the LDS200 also create clipped load dump pulses as per international standards as well as manufacturer requirements.

Features
  • 5.7 inch color touch screen
  • Generates clipped load dump pulse
  • internal adjustable source impedance
  • Pulse duration up to 1200ms (internal resistance more than 2 Ω)
  • Comply with most international standards and car manufacturer standards
  • Built-in 60V/30A coupler
  • With the function of current detection and over current protection
  • Ethernet, RJ 45, PC control, and test report documentation and print
 
           
    3ctest Produktüberblick 
 
         
   

LDS 200D series - Load Dump Pulse Simulator

 
           
   

LDS 200D series load dump simulator is used to simulate the battery sudden disconnection from AC generator while AC generator charging to battery (e.g. sudden disconnection caused by corrosion).

LDS 200D series
LDS 200D series

PDF Datasheet

 

LDS 200D series load dump simulator is used to simulate the battery sudden disconnection from AC generator while AC generator charging to battery (e.g. sudden disconnection caused by corrosion). This load dump pulse is high energy pulse with strong destructive effects and duration up to hundreds of milliseconds.

Load dump pulses produced by LDS 200D can meet ISO 7637-2, ISO16750-2, SAE J1113, SAE J1455, JASO and multiple car manufacturer standards like Ford, Chrysler, Renault, PSA, Nissan, etc. With internal amplitude limiting circuit, LDS200D can also produce clipping load dump pulses as per international standards and car manufacturer standards.

Features

  • 5.7 inch colorful touch screen front panel operation
  • Can produce clipping load dump pulses
  • Internal 0.5-38Ω source impedance,0.1Ω step
  • Pulse duration time up to 1200ms
  • Waveform can be edited freely
  • Internal 60V/30A coupler,can be extended to 50/100/200A
  • Internal battery switch
  • With functions of DUT current detection and over current protection
  • Ethernet, RJ45 interface for PC remote control
 
           
    3ctest Produktüberblick 
 
           
   

deg-Messtechnik GmbH  |  A-3430 Tulln  |  Brüdergasse 1-3, Top B14  |  fon: +43 2272 20522 - 0  |   fax: +43 2272 20522 - 17  |  mail: info@deg-messtechnik.at
Impressum  |  AGB  |  Sitemap