Digitale elektronische Geräte  

 
   

3ctest - Automotive Voltage Variation Simulator

 
   
  PFS A l APG 40Cxx/APG 60Cxx l APS   
         
   

PFS A - Automotive Power Failure Simulator

 
           
   

PFS A series Automotive Power Failure Simulator is standalone test equipment with electronic switch inside, it can simulate voltage dip and drop (micro interruption) and ensure the voltage fast rising or falling time to be within 1s.

PFS A
PFS A

PDF Datasheet

 

PFS A series Automotive Power Failure Simulator is standalone test equipment with electronic switch inside, it can simulate voltage dip and drop (micro interruption) and ensure the voltage fast rising or falling time to be within 1┬Ás. It needs two DC voltage sources for simulating voltage dip, but needs only one DC voltage source for simulating voltage drop (micro interruption). With the original technology of output impedance variable, it can simulate the power failure much more closely, simulating open circuit at high impedance and short circuit at low impedance, waveforms complying with standards under different resistive loads.

PFS A series Automotive Power Failure Simulator can be operated manually or via Ethernet interface controlled by AutoLab software. EUT power supply voltage can be switched quickly under the program control. The switch has two input ports to connect two power supplies. The load bearing of DC switching is up to 60V, available for 42V power system test.

Features
  • Standalone test equipment used for voltage dip and short interruption test
  • Rising/fall time < 1 us
  • With electronic short circuit protection function
  • Rated voltage 60V DC
  • 5.7 inch color touch screen operation on front panel
  • Standard test program
  • Ethernet interface
 
           
    3ctest Produktüberblick 
 
         
   

APG 40Cxx/APG 60Cxx - Automotive power voltage variation simulator

 
           
   

APG series can be used as battery supply simulation and DC voltage source. During test in test lab, APG series can replace vehicle battery. Pulse 2b, Pulse 4, slow sine wave noise and other complicated voltage variation test can be conducted by APG series simulator

APG 40Cxx/APG 60Cxx
APG 40Cxx/APG 60Cxx

PDF Datasheet

 

APG series can be used as battery supply simulation and DC voltage source. During test in test lab, APG series can replace vehicle battery. Pulse 2b, Pulse 4, slow sine wave noise and other complicated voltage variation test can be conducted by APG series simulator. It is a cost-effective way to replace APS series for slow waveforms or high current condition. It can simulate multiple battery supply waveforms as per international standards and multiple automotive manufacture standards. Also, as a powerful DC source, it can be supply power for DUT during automotive transient pulse test, which can meet three kinds of supply voltage. For different models and test applications, the test voltage is up to 60V and current is up to 100A.

Features

  • 5.7 inch color touch screen
  • Test voltage up to 60V
  • Test current up to 100A
  • low output impedance
  • Unipolarity output
  • high impulse current capacity
  • Powerful DC voltage source
  • bandwidth up to 30KHz
  • Pulses 4 and 2b as per ISO 7637-2
  • Voltage variation test as per ISO 16750-2
  • Pre-programmed test routines to simulate various supply waveforms
  • Ethernet, RJ45, PC control, and test report documentation and print
 
           
    3ctest Produktüberblick 
 
         
   

APS - Automotive power voltage variation simulator

 
           
   

APS series can be used as battery supply simulation and DC voltage source. During test in test lab, APS series can replace vehicle battery. Pulse 2b, Pulse 4, sine wave noise and other complicated voltage variation test can be conducted by APS series simulator as per ISO 7637/16750

APS
APS

PDF Datasheet

 

APS series can be used as battery supply simulation and DC voltage source. During test in test lab, APS series can replace vehicle battery. Pulse 2b, Pulse 4, sine wave noise and other complicated voltage variation test can be conducted by APS series simulator as per ISO 7637/16750. It can simulate multiple battery supply waveforms as per international standards and multiple automotive manufacture standards. Also, as a powerful DC source, it can supply power for DUT during automotive transient pulse test, which can meet three kinds of supply voltage. APS series can also be used as power amplifier for magnetic field immunity test.

Features

  • 5.7 inch color touch screen
  • Test voltage up to 60V
  • Test current up to 30A
  • high impulse current capacity
  • low output impedance
  • Powerful DC voltage source
  • Automatic voltage compensation with external control of simulated input waveform
  • Quick response, the bandwidth up to 100 kHz
  • Pulses 4 and 2b as per ISO 7637-2:2004
  • Voltage variation test as per ISO 16750-2:2006
  • Pre-programmed test routines to simulate various supply waveforms
  • To simulate various supply waveforms, e.g. superimposed nose
  • Ethernet, RJ45, PC control, and test report documentation and print
 
           
    3ctest Produktüberblick 
 
           
   

deg-Messtechnik GmbH  |  A-3430 Tulln  |  Brüdergasse 1-3, Top B14  |  fon: +43 2272 20522 - 0  |   fax: +43 2272 20522 - 17  |  mail: info@deg-messtechnik.at
Impressum  |  AGB  |  Sitemap