Digitale elektronische Geräte  

 
   

Kikusui - Netzgeräte Controller

 
   
  Netzgeräte Controller: PIA4850 l PIA4850 Serie   
         
   

PIA4850 - Netzgeräte Controller von Kikusui

     
           
   

Kikusui PIA4850
PIA4850

PDF Datasheet PDF Datasheet

The PIA4850 is a power supply controller with USB interface to control Kikusui DC power supply with TP-BUS. PAS Series, PWR Series or other models that equips TP-BUS can be digitaly controled by PC, as well as for read-back of output values and status monitoring. It operates using bus power and with its simple system and compact structure, you can use whenever you need with easy setup.

 

Features:

  • USB 2.0 compatible
  • Can be used with Windows Vista/XP/2000.
  • Operates using bus power. Requires no AC adapter.
  • Bus power operation. No AC adapter required.
  • Allows read-back of output values and status monitoring.
  • Can control up to 32(*1) DC power supplies that equip TP-BUS(*2).
    (Different power supply models can be combined.)
    TP-BUS connection can be extended up to 200 m. Ideal for remote monitoring !
 
           
    Kikusui Produktüberblick l Netzgeräte und elektronische Lasten Überblick 
 
         
   

PIA4800 - Netzgeräte Controller von Kikusui

     
           
   

Kikusui PIA4800 Serie
PIA4800 Serie

PDF Datasheet PDF Datasheet

The Kikusui PIA4810 is a power supply controller capable of analog and digital control. It is equipped with the GPIB and RS-232C interfaces and 4 slots, which allow 4 each of PIA4800 Series-specific control boards to be installed. A control board is capable of analog control of 2 channels of DC power supplies or electronic loads; a total of 8 channels can be controlled.

Moreover, DC power supplies with a digital remote-control function, such as the Kikusui PAS, PAM(*1) and PMR Series, can be directly connected to the PIA4830 via a TP-BUS (twisted pair bus), enabling a system up to 32 channels to be controlled digitally.

 

Kikusui PIA4820 is an expansion unit that can be connected to the Kikusui PIA4810 or Kikusui PIA4830 via a TP-BUS to provide additional control channels. In the same way as the Kikusui PIA4810, it allows a maximum of 4 control boards to be installed.
Then it is possible to use up to 3 units of Kikusui PIA4820 as an expansion that can be connected to the PIA4810 via the TP-BUS, the system is capable of controlling a maximum of 32 channels. Moreover, the combined use of the GPIB and TP-BUS allows the system to control a maximum of 448 channels.

Kikusui PIA4830 is a power supply controller only for digital control. It is capable of digitally controlling a system up to 32 channels of such Kikusui PAS, PAM(*1) and Kikusui PMR Series DC power supplies via the TP-BUS.
OP01-PIA and OP02-PIA are control boards designed exclusively for the Kikusui PIA4810 and Kikusui PIA4820.

A single control board is capable of analog control of 2 channels of DC power supplies or electronic loads. The OP01-PIA is a full-control board with voltage and current setting and read-back functions, while the OP02-PIA4800 has only the voltage and current setting feature.

(*1) The TP-BUS interface option is factory installed option, this option should be indicated when ordering.

 
           
    Kikusui Produktüberblick l Netzgeräte und elektronische Lasten Überblick 
 
           
   

deg-Messtechnik GmbH  |  A-3430 Tulln  |  Brüdergasse 1-3, Top B14  |  fon: +43 2272 20522 - 0  |   fax: +43 2272 20522 - 17  |  mail: info@deg-messtechnik.at
Impressum  |  AGB  |  Sitemap